Assessment and inspection
Steegman Elektrotechniek carries out tests and inspections of electrical installations in accordance with the applicable standards. Our specialists identify risks at an early stage and advise on measures to ensure safe and
reliable operation.
NEN 1010
Steegman ensures that electrical installations are safe, reliable and fully compliant with NEN 1010-operate as standard. With clear checks and expert reports, you’ll know exactly where you stand.
Design review
We assess whether your installation design complies with the current NEN 1010 standard-guidelines. These will help you avoid errors during the design and installation phases and ensure that your installation is built on a safe and sound foundation.
Handover inspection
For new or modified installations, we check that they have been installed in accordance with NEN 1010. You will receive a clear report setting out whether the installation can be safely commissioned and, if necessary, what improvements may be required.
Periodic inspection
To continue to ensure safe use, we carry out periodic NEN 1010 inspections-carries out inspections. These inspections usually take place every 3 to 7 years and focus on risk areas, the technical condition of the property and any necessary repair work. Everything is recorded in a clear inspection plan and report.
Medical facilities
Installations in medical environments require extra assurance. We carry out inspections in accordance with NEN 1010-standards for medical facilities, so that the safety of patients and healthcare staff is always guaranteed.
Clear reporting
Each inspection concludes with a clear and concise report, focusing on the actual condition of the installation and providing specific recommendations.
Steegman Elektrotechniek: the assurance that your electrical installation operates safely, reliably and in accordance with the relevant standards.
NEN 3140
NEN 3140 focuses on the safe use, inspection and management of electrical installations and work equipment. Where NEN NEN explains that 1010 is a design standard 3140: how companies should work safely with existing installations and equipment.
Instructions & Guidelines
Employees working with or near electrical installations must be properly trained and authorised. This means that they are aware of the risks involved and of the applicable procedures, safety regulations and working methods.
Steegman helps you draw up clear instructions and ensure safe working practices within your organisation.
Policies & Procedures
Every electrical installation and every item of work equipment must be officially assigned to a person responsible for the installation. Only experts and designated staff (IVs, WVs, VPs and VOPs) may carry out work involving an electrical risk.
We can assist you in drawing up your safety policy and risk-inventory, organisational structure and the inspection plan, which sets out how and when inspections are carried out.
Inspection of electrical installations (E-inst)
An inspection plan is drawn up in advance, setting out, amongst other things, the scope, risks, standards, inspection frequency and measurement methods. During the inspection, we assess whether your installation can be used safely and complies with the applicable NEN standards 3140-requirements.
Following the assessment, you will receive a clear report setting out the findings and any areas requiring improvement.
Inspection of work equipment
Work equipment such as hand tools, machinery and extension devices must be inspected at regular intervals to ensure safe use. We carry out these inspections in accordance with NEN 3140 and provide a clear overview of which resources have been approved and where maintenance is required.
Clear reporting
The reports do not contain any superfluous measurement data, but provide immediate insight into the condition of your installations and work equipment, including specific recommendations. If necessary, we also carry out-inspections.
Steegman ensures that your electrical installations and work equipment are demonstrably safe, comply with NEN 3140 and operate reliably.
NTA 8220
NTA 8220 is the assessment method used to identify fire risks caused by electrical equipment and electrical installations. An inspection carried out in accordance with this guideline focuses entirely on identifying situations that may pose an increased risk of fire.
An NTA 8220-An inspection provides organisations with a clear understanding of the condition of their electrical installations and helps to identify risks at an early stage. Thermography is often a key part of this assessment.
Steegman carries out these inspections in accordance with the latest guidelines and provides a clear report containing recommendations for improvement, enabling you to significantly reduce the fire risk.
Tool Inspection
Employers are obliged to ensure a safe working environment and to provide work equipment that can be used safely. Power tools must therefore be inspected at regular intervals in accordance with the requirements of NEN 3140.
Steegman carries out these inspections professionally and efficiently, so you can be sure that your tools are safe, reliable and legally approved. You will receive a clear overview of all inspected equipment and any necessary follow-up steps.
SCIOS Scope 8, 9, 10 & 12
SCIOS-Inspections are specialised safety checks carried out on various types of electrical installations and work equipment. They provide insurers, businesses and building owners with assurance regarding the safety, quality and reliability of their installations.
Scope 8 – Electrical Installations
Scope 8 focuses on a building’s electrical installations. The inspection checks whether these installations can be used safely and comply with the applicable requirements. Following the inspection, you will receive a clear report setting out any areas for improvement.
Scope 9 – Work equipment
Scope 9 is based on NEN 3140 focuses on power tools and other portable electrical appliances, such as drills, computers, coffee machines, cable reels and cleaning machines. The inspection assesses safety, registration and quality. This ensures you know exactly which items can be used safely.
Scope 10 – Fire Risk in Installations
Scope 10 is based on NTA 8220 and focuses on the risk of fire caused by the electrical installation or by connected equipment. The inspection assesses fire risks and provides specific recommendations to minimise them. You will receive a report that can be used directly with your insurer.
Scope 12 – PV-installations
Scope 12 was developed at the request of insurers due to the fire risks associated with solar panel installations. The inspection focuses on safe installation, correct fitting and the good technical condition of your PV system-installation. Here too, you will receive a clear report setting out recommendations and the necessary measures.
Lightning protection
A reliable lightning protection system is essential for the safety, continuity and protection of your building and electrical installations. A lightning strike can cause damage that is not always immediately visible, but which can lead to power cuts, fire or high repair costs. Steegman inspects both external and internal lightning protection systems in accordance with the applicable standards.
External systems
External lightning protection systems safeguard buildings against direct strikes and the resulting mechanical and thermal effects. During the inspection, we check for wear and tear, corrosion, mechanical stress and the overall condition of the system, amongst other things.
The NEN 1010 refers to external lightning protection IEC 62305, the international standard for the design and inspection of comprehensive lightning protection systems.
Internal systems
Internal lightning protection (surge protection) protects electrical and electronic equipment against voltage surges that may be caused by a lightning strike or switching operations. In the NEN 1010 sets out specific provisions for the correct application and installation of such surge protection.
Steegman assesses the safety levels, earthing, surge arresters and connections to ensure that your electrical installation remains fully protected against internal surges.
Thermography
Thermographic inspections prevent malfunctions, overheating and even fires. Using a thermal imaging camera, we identify temperature differences that indicate faults, wear and tear or overloading. Examples include loose connections, ageing components, overloaded units or problems in PV systems-installations.
Structural defects such as heat loss, thermal bridges and poorly functioning underfloor heating also become apparent.
A thermographic inspection can be carried out whilst the system is in operation and provides a quick insight into potential risks. It is ideal as a routine inspection or as a supplementary safety check.
Net Analysis
A net analysis provides insight into the quality of your power supply. Poor power quality can lead to power cuts, faulty appliances, flickering lights and a shorter lifespan for equipment.
Steegman measures, analyses and advises on the basis of voltage, power and grid load, ensuring that problems are quickly identified and resolved.
Power Quality Management
We continuously monitor the quality of your network and optimise it where necessary to prevent outages and improve reliability. In the event of a shortage of network capacity, we provide a clear analysis of the situation and advise on solutions.
Energy scan
With an energy audit, we analyse your consumption profile and provide insights into opportunities for savings, efficiency improvements and greater sustainability.
Organisations whose energy consumption exceeds the statutory limits are obliged to implement energy-saving measures and, in some cases, even to use an energy management system. Our assessment helps you to comply fully with these obligations.
Cable detection
Cabling forms the backbone of any technical installation. A fault often results in costly delays, production downtime and safety risks.
With our advanced cable detection We locate cables and faults quickly, precisely and without unnecessary chopping, breaking or digging. Even when cables differ from existing drawings, we map them accurately to a depth of 1.50 to 2 metres.
Accurate cable diagnosis
Our cable diagnostics detect faults with a precision down to a few centimetres malfunctions such as:
- Cable breaks
- Short circuits
- Transition resistors
This prevents unnecessary work and significantly reduces downtime.
Understanding your electrical installation
When it comes to renovations, extensions or breakdowns, clarity is essential. We ensure a comprehensive overview of your switchgear and distribution systems by identifying groups. This way, you know exactly which system components are connected to which group.
The result:
- Greater safety
- Fewer mistakes
- Works more efficiently
- Reliable documentation
Efficient, safe and professional insight into your system.
Condition assessment in accordance with NEN 2767
The NEN 2767 condition assessment is a standardised method for objectively and unambiguously recording the technical condition of building and installation components
A condition assessment of the electrical installation in accordance with NEN 2767 provides the basis for a Long-Term Maintenance Plan (MJOP).
The condition scores are combined with:
- life expectancy
- urgency of recovery
- legal requirements
- (strategic) maintenance objectives
Climbing equipment
The inspection of access equipment is essential to ensure safe working at height. Equipment such as ladders, staircases and mobile scaffolding is used intensively on a daily basis and is therefore susceptible to wear and tear, damage and misuse. Regular inspections prevent unsafe situations, ensure compliance with legislation and regulations, and ensure that employees can carry out their work safely.
Steegman Elektrotechniek B.V. carries out inspections on your behalf:
- Stairs
- Ladders
- Mobile scaffolding
- Steps and work platforms
- Folding ladders, extension ladders and multi-purpose ladders
Data networks
A reliable data network forms the backbone of any modern organisation. With increasing digitalisation, cloud applications and growing data volumes, it is becoming ever more important that network infrastructures demonstrably meet the appropriate performance and quality standards. Validation and qualification of data networks ensure that the cabling and network components perform as designed and that capacity, speed and stability are guaranteed.
Micro-ohm measurement
A micro-ohm measurement (low-resistance measurement) is an electrical testing method used to accurately measure very low resistance values – in the micro-ohm (µΩ) range. This measurement is essential for assessing the quality of connections in electrical installations, such as busbar systems, switchgear and distribution boards, and earthing systems.
Micro-ohm measurements are carried out to check whether the electrical contact resistance of a connection is low enough to carry currents safely and without excessive heat build-up.
Looking for a reliable inspection?
Our specialists will carry out a professional assessment of your installation in accordance with the applicable standards.